高級會員
已認證
| 品牌： | Retsch |
| 產地： | 德國 |
| 關注度： | 7040 |
| 型號： | PP 35 |
Solid, high-quality pellets are an important precondition for
reliable and meaningful XRF analysis. With the PP 35, RETSCH offers a
pellet press which produces strong pellets with a smooth surface.
The PP 35 features an individual pressure force regulation in the range of 0 to 35 t. The PP 35 combines the advantage of a small benchtop model with high press forces, which are built automatically in up to three steps, ensuring that even difficult materials are pressed perfectly.
應用實例
原料, 水泥, 爐渣, 礦物, 礦石, ...
優點
benchtop model with small footprint
individual pressure force adjustment up to 35 tons
多種尺寸的模具和鋁杯
多種直徑的沖壓模具
10 SOPs can be defined and stored for routine applications
comfortable parameter setting via display
自動壓力控制
性能指標
| 應用 | 為光譜分析壓片 |
| 應用領域 | 化學 / 合成材料, 地質 / 冶金, 建筑原料, 環境 / 資源回收利用, 玻璃/ 陶瓷 |
| **壓力 | 35 t, automatic press |
| 壓力 | 0 - 35 t (0 - 343 kN) |
| 壓力上升時間/持續時間/下降時間 | fix ramp / 45 - 120 s / fix ramp |
| 處理程序 | 10 |
| 鋼環（外徑/內徑） | 32 mm / 40 mm 35 mm / 40 mm (max. pressure force 15 t) |
| 無數據顯示 | 32 mm (max. pressure force 25 t) / 40 mm (max. pressure force 35 t) |
| 電源數據： | 110-240 V, 50/60 Hz |
| 電源接頭： | 單相 |
| 機體尺寸 (寬x高x縱深) | 335 x 495 x 570 mm |
| 凈重 | 120 kg |
| 標準 | CE |
Please note:
受樣品材料性質和儀器配置/設定的影響
作用原理
The steel ring or aluminium cup is inserted in the pressing tool of
the PP 35 and filled with the sample material via a hopper. The complete
slide is then pushed beneath the pressure plate and the pressing is
started.
During pressure build-up the density of the powder
increases. The maximum pressure force must be held over a certain period
of time to allow full development of the interparticulate adhesive
forces thus guaranteeing maximum stability. Pressing in up to three
steps with e.g. increasing pressure force results in stable pellets.
根據技術改造和誤差調整
- 光譜分析壓片機的工作原理介紹？
- 光譜分析壓片機的使用方法？
- 光譜分析壓片機多少錢一臺？
- 光譜分析壓片機使用的注意事項
- 光譜分析壓片機的說明書有嗎？
- 光譜分析壓片機的操作規程有嗎？
- 光譜分析壓片機的報價含票含運費嗎？
- 光譜分析壓片機有現貨嗎？
- 光譜分析壓片機包安裝嗎？
德國Retsch（萊馳）中國總部
